rus
TS_pub
technospheramag
technospheramag
ТЕХНОСФЕРА_РИЦ
Column of Minpromtorg
Exhibitions, conferences, events
Problems and Solutions
V. PRONYAKIN, A. KOMSHIN
THE STATE OF METROLOGICAL SUPPORT FOR THE ASSESSMENT OF CONFORMITY AND QUALITY OF PRODUCTS IN THE PRODUCTION PROCESS DOI: 10.22184/2499-9407.2020.20.03.16.17
Achieving a high level, quality and competitiveness
of domestic products in the world market
is unattainable without qualified metrological
support for assessing the conformity of products
in the production process. At the same time, the industry lacks the necessary number of metrology specialists.
THE STATE OF METROLOGICAL SUPPORT FOR THE ASSESSMENT OF CONFORMITY AND QUALITY OF PRODUCTS IN THE PRODUCTION PROCESS DOI: 10.22184/2499-9407.2020.20.03.16.17
Achieving a high level, quality and competitiveness
of domestic products in the world market
is unattainable without qualified metrological
support for assessing the conformity of products
in the production process. At the same time, the industry lacks the necessary number of metrology specialists.
Tags: competitiveness metrological support product conformity конкурентоспособность метрологическое обеспечение соответствие продукции
A. AKIMOV
COVID-19 EPIDEMIC AND MECHANICAL ENGINEERING: EXPERIENCE OF THE PRC DOI: 10.22184/2499-9407.2020.20.03.18.19
The article considers the measures to stimulate the engineering industries of the Chinese economy aimed at countering the recession caused by the COVID-19 coronavirus pandemic and, as a result, the deceleration of the global economy.
COVID-19 EPIDEMIC AND MECHANICAL ENGINEERING: EXPERIENCE OF THE PRC DOI: 10.22184/2499-9407.2020.20.03.18.19
The article considers the measures to stimulate the engineering industries of the Chinese economy aimed at countering the recession caused by the COVID-19 coronavirus pandemic and, as a result, the deceleration of the global economy.
News
Materials Machine Tools
A. KUZNETSOV
DIRECTIONS OF DEVELOPMENT OF METALCUTTING MACHINES: SYSTEM PRINCIPLES. PART 1 DOI: 10.22184/2499-9407.2020.20.03.30.41
The article considers mechanisms for increasing the efficiency of creating new, more progressive and innovative technological equipment based on the analysis of the evolutionary process cycles of the development of technological methods of production in relation to the continuous improvement of the designs of machine tools, their components and subsystems.
DIRECTIONS OF DEVELOPMENT OF METALCUTTING MACHINES: SYSTEM PRINCIPLES. PART 1 DOI: 10.22184/2499-9407.2020.20.03.30.41
The article considers mechanisms for increasing the efficiency of creating new, more progressive and innovative technological equipment based on the analysis of the evolutionary process cycles of the development of technological methods of production in relation to the continuous improvement of the designs of machine tools, their components and subsystems.
Tags: design efficiency mechatronic and adaptronic systems scientific and technological progress technological equipment мехатронные и адаптронные системы научно-технический прогресс проектирование технологическое оборудование эффективность
Materials processing technologies
A. SMIRNOV, YU. IVAKIN, V. TARASOVSKY, V. RYBALCHENKO, A. VASIN, A. KHOLODKOVA, M. PAKHOMOV, S. NOVIKOV, V. STOLYAROV
COLD SINTERING IN THE PRESENCE OF AQUATIC MEDIUM: MECHANISM AND APPLIED ASPECTS. OVERVIEW. PART 1 DOI: 10.22184/2499-9407.2020.20.03.46.54
The article presents a brief review of the current state of research on a new process of consolidation of ceramic powders in an aqueous medium at temperatures below 500 ° C, known as the "cold sintering process".
COLD SINTERING IN THE PRESENCE OF AQUATIC MEDIUM: MECHANISM AND APPLIED ASPECTS. OVERVIEW. PART 1 DOI: 10.22184/2499-9407.2020.20.03.46.54
The article presents a brief review of the current state of research on a new process of consolidation of ceramic powders in an aqueous medium at temperatures below 500 ° C, known as the "cold sintering process".
Tags: ceramics cold sintering hydrothermal synthesis inorganic materials mass transfer mechanism mechanical-chemical effects oxide ceramics pre- and supercritical aqueous medium reaction sintering sintering sintering mechanisms гидротермальный синтез до- и сверхкритическая водная среда керамика механизм переноса массы механизмы спекания механически-химические эффекты неорганические материалы оксидная керамика реакционное спекание спекание холодное спекание
M. VARTANOV, A. VLASOV
ROBOTIZATION OF FINISHING PARTS IN MECHANICAL ENGINEERING. DOI: 10.22184/2499-9407.2020.20.03.56.61
The article considers the prospects of using industrial robots for mechanical finishing of parts in mechanical engineering. It presents the schemes for constructing operations using robots
and gives the composition of the cell for performing robotic finishing processing. The article
presents the results of experimental studies carried out with the aim of finding optimal cutting conditions that ensure the required quality of surface treatment.
ROBOTIZATION OF FINISHING PARTS IN MECHANICAL ENGINEERING. DOI: 10.22184/2499-9407.2020.20.03.56.61
The article considers the prospects of using industrial robots for mechanical finishing of parts in mechanical engineering. It presents the schemes for constructing operations using robots
and gives the composition of the cell for performing robotic finishing processing. The article
presents the results of experimental studies carried out with the aim of finding optimal cutting conditions that ensure the required quality of surface treatment.
Tags: robotic systems; finishing processing; surface quality качество поверхности отделочная обработка роботизированные системы
A. MARENKOVA, V. DIKAREVA, P. PETROV, B. SAPRYKIN
USING T-FLEX ANALYSIS TO DETERMINE THE TENSILE SAFETY FACTOR OF A PLA-PLASTIC SAMPLE DOI: 10.22184/2499-9407.2020.20.03.62.68
The article considers the possibility of using modern CAE-programs to predict the ability of a polymer sample to withstand loads exceeding the calculated ones. An assessment is made of the possibility of calculating the safety factor of a PLA-plastic sample using the SAE-system at the stage of choosing the shape of a sample for tensile testing.
USING T-FLEX ANALYSIS TO DETERMINE THE TENSILE SAFETY FACTOR OF A PLA-PLASTIC SAMPLE DOI: 10.22184/2499-9407.2020.20.03.62.68
The article considers the possibility of using modern CAE-programs to predict the ability of a polymer sample to withstand loads exceeding the calculated ones. An assessment is made of the possibility of calculating the safety factor of a PLA-plastic sample using the SAE-system at the stage of choosing the shape of a sample for tensile testing.
Tags: additive technologies cae programs cae-программы field tests pla-plastic safety factor static strength tensile tests virtual experiment аддитивные технологии виртуальный эксперимент испытания на растяжение коэффициент запаса натурные испытания пла-пластик статическая прочность
Information Technologies
E. YURTSEV, E. RAKHMILEVICH, I. CHERNODED, V. ZAKHAROV, A. SHURKO, D. KARGAPOLTSEV
FSUE NGO “TEKHNOMASH” EXPERIENCE IN CONDUCTING TECHNOLOGICAL AUDIT OF THE DIGITAL DEVELOPMENT LEVEL OF THE ROCKET AND SPACE I NDUSTRY DOI: 10.22184/2499-9407.2020.20.03.76.80
The article discusses the purpose and key
stages of a technological audit of digital
development on the example of one integrated structure of the rocket and space
industry. It presents the main results of the work performed and proposals for the further
development of this direction.
FSUE NGO “TEKHNOMASH” EXPERIENCE IN CONDUCTING TECHNOLOGICAL AUDIT OF THE DIGITAL DEVELOPMENT LEVEL OF THE ROCKET AND SPACE I NDUSTRY DOI: 10.22184/2499-9407.2020.20.03.76.80
The article discusses the purpose and key
stages of a technological audit of digital
development on the example of one integrated structure of the rocket and space
industry. It presents the main results of the work performed and proposals for the further
development of this direction.
Tags: digitalization industry 4.0 innovation process automation rocket and space industry автоматизация процессов «индустрия 4.0» инновации ракетно-космическая отрасль цифровизация
Components
A. KLEPIKOV
LABORATORY ANALYSIS OF LUBRICANTCOOLING FLUIDS DOI: 10.22184/2499-9407.2020.20.03.82.85
The article presents an overview of the standard set of tests for water-miscible cutting fluids
of the direction applied to metalworking. Special attention is paid to the foam test and the
lubricity test.
LABORATORY ANALYSIS OF LUBRICANTCOOLING FLUIDS DOI: 10.22184/2499-9407.2020.20.03.82.85
The article presents an overview of the standard set of tests for water-miscible cutting fluids
of the direction applied to metalworking. Special attention is paid to the foam test and the
lubricity test.
Tags: cutting fluids (cutting fluid) foaming ability lubricity water miscible cutting fluid водосмешиваемые сож вспениваемость смазочно-охлаждающие жидкости (сож) смазывающая способность
Tools and Tool Systems
A. AFONICHKINA
THE FUTURE IS THE RESULT OF DAILY CHOICES DOI: 10.22184/2499-9407.2020.20.03.86.87
THE FUTURE IS THE RESULT OF DAILY CHOICES DOI: 10.22184/2499-9407.2020.20.03.86.87
CASE STORY
Looking Back
G. BAZANCHUK, S. KURAKOV
BEAM? CALIBER? BEAM CALIPER! DOI: 10.22184/2499-9407.2020.20.03.91.96
BEAM? CALIBER? BEAM CALIPER! DOI: 10.22184/2499-9407.2020.20.03.91.96