rus
TS_pub
technospheramag
technospheramag
ТЕХНОСФЕРА_РИЦ
Column of Minpromtorg
Exhibitions, conferences, events
News
Materials Machine Tools
Materials processing technologies
O. A. Lavrentieva
New Welding Standards: ESAB Announces Updated Product Range DOI: 10.22184/2499-9407.2023.33.4.32.33
Presented new products of ESAB – welding mask Santinel A60, equipped with an improved filter with automatic dimming, realizing the new technology of wide-spiral light control OpTCS, as well as vacuum packaging VacPak for long-term storage of electrodes, which can be used immediately after opening the package.
New Welding Standards: ESAB Announces Updated Product Range DOI: 10.22184/2499-9407.2023.33.4.32.33
Presented new products of ESAB – welding mask Santinel A60, equipped with an improved filter with automatic dimming, realizing the new technology of wide-spiral light control OpTCS, as well as vacuum packaging VacPak for long-term storage of electrodes, which can be used immediately after opening the package.
Tags: materials for welding and cutting personal protective equipment vacuum packing of electrodes welding equipment вакуумная упаковка электродов материалы для сварки и резки сварочная техника средства индивидуальной защиты
A. A. Misochenko, V. V. Stolyarov
Heat Effect in the Metalls During Electropulse Treatment DOI: 10.22184/2499-9407.2023.33.4.34.41
The thermal effect of pulse current in alloys for various purposes: shape memory of Ti49,2Ni50,8, and structural D16 and VT6 has been studied. It was found that the thermal effect during pulse current treatment depends not only on the electrical and heat conducting properties of alloys, but also decreases with increasing dispersion and level of internal microstructure stresses. The heating under the modes similar to the current modes during rolling of the studied alloys has been experimentally modeled.
Heat Effect in the Metalls During Electropulse Treatment DOI: 10.22184/2499-9407.2023.33.4.34.41
The thermal effect of pulse current in alloys for various purposes: shape memory of Ti49,2Ni50,8, and structural D16 and VT6 has been studied. It was found that the thermal effect during pulse current treatment depends not only on the electrical and heat conducting properties of alloys, but also decreases with increasing dispersion and level of internal microstructure stresses. The heating under the modes similar to the current modes during rolling of the studied alloys has been experimentally modeled.
Tags: deformation with current dispersity of structure electric pulse processing electroplastic effect thermal effect during current processing деформации с током дисперсность структуры тепловой эффект при обработке током электроимпульсная обработка электропластический эффект
E. S. Zakirov, A. G. Panov
Upgrading the Modification of Compacted Graphite Iron to Provide a Given Structure DOI: 10.22184/2499-9407.2023.33.4.42.51
This paper provides a brief overview of the study results pointed to improve the modifying cast iron technology for vermicular graphite in order to increase stability of the structure and properties of critical machine building parts, as well as the background that were the root cause for these studies.
Upgrading the Modification of Compacted Graphite Iron to Provide a Given Structure DOI: 10.22184/2499-9407.2023.33.4.42.51
This paper provides a brief overview of the study results pointed to improve the modifying cast iron technology for vermicular graphite in order to increase stability of the structure and properties of critical machine building parts, as well as the background that were the root cause for these studies.
Tags: cast iron master-alloy modification properties structure лигатура модифицирование свойства структура чугун
V. E. Inozemtcev, A. Yu. Popov
The Aspects of Providing a High-Quality Surface Due Complex Processing Methods for Aluminum Alloys and Porous Cermets DOI: 10.22184/2499-9407.2023.33.4.52.58
The formation processes of qualitative parameters of the surface layer for parts made of aluminum alloys and porous metal-ceramics, as well as the possibilities of controlling the processing technology are studied. The basic criteria for achieving the required parameters of quality surface in the process of complex forming technology are established.
The Aspects of Providing a High-Quality Surface Due Complex Processing Methods for Aluminum Alloys and Porous Cermets DOI: 10.22184/2499-9407.2023.33.4.52.58
The formation processes of qualitative parameters of the surface layer for parts made of aluminum alloys and porous metal-ceramics, as well as the possibilities of controlling the processing technology are studied. The basic criteria for achieving the required parameters of quality surface in the process of complex forming technology are established.
Tags: alloys cermets coolant porosity processing quality roughness shaping silumin surface. качество металлокерамика обработка поверхность пористость силумин сотс сплавы формообразование шероховатость
D. A. Boldyrev
Study of Influence of Stressed State and Natural Aging of Brake Drum Castings on Their Geometry and Machinability by Cutting Tools DOI: 10.22184/2499-9407.2023.33.4.60.64
Causes of brake drums performance failure during braking of automobile vehicles are described. The factors causing deviation of geometrical parameters from the set values are revealed. Residual stresses in cast blanks and products after annealing and subsequent blade machining as well as the influence of natural aging on machinability of brake drum castings are investigated.
Study of Influence of Stressed State and Natural Aging of Brake Drum Castings on Their Geometry and Machinability by Cutting Tools DOI: 10.22184/2499-9407.2023.33.4.60.64
Causes of brake drums performance failure during braking of automobile vehicles are described. The factors causing deviation of geometrical parameters from the set values are revealed. Residual stresses in cast blanks and products after annealing and subsequent blade machining as well as the influence of natural aging on machinability of brake drum castings are investigated.
Tags: brake drums brake mechanisms operability deviation from roundness of products machinability natural aging residual stresses естественное старение обрабатываемость остаточные напряжения отклонение от круглости изделий работоспособность тормозных механизмов тормозные барабаны
Machine Science
S. A. Skvortsov, N. L. Kovaleva, A. B. Lastochkin, N. S. Azikov, S. M. Demidov
Kinematic Analysis of a Modified Rotopod Mechanism with Four Kinematic Chains DOI: 10.22184/2499-9407.2023.33.4.70.76
An algorithm for solving the problem of determining the working area of a modified rotopod mechanism with four kinematic chains, the output link of which has six degrees of freedom, is presented. It is shown, that the considered spatial mechanism can find application for robotic complexes for processing of complex-shaped parts and additive technologies, as well as in measuring metrological systems.
Kinematic Analysis of a Modified Rotopod Mechanism with Four Kinematic Chains DOI: 10.22184/2499-9407.2023.33.4.70.76
An algorithm for solving the problem of determining the working area of a modified rotopod mechanism with four kinematic chains, the output link of which has six degrees of freedom, is presented. It is shown, that the considered spatial mechanism can find application for robotic complexes for processing of complex-shaped parts and additive technologies, as well as in measuring metrological systems.
Tags: degrees of freedom kinematic chain output link parallel structure mechanism platform rotopod-type mechanisms working area of the mechanism выходное звено кинематическая цепь механизм параллельной структуры механизмы типа «ротопод» платформа рабочая зона механизма степень свободы
Information Technologies
B. M. Morozov
New-Engineering is the Way to Find True Power for Engineering in Russia DOI: 10.22184/2499-9407.2023.33.4.66.69
New-Engineering is the Way to Find True Power for Engineering in Russia DOI: 10.22184/2499-9407.2023.33.4.66.69
CASE STORY
Annual Issue