rus
Issue #2/2022
P. A. Petrov, D. R. Agzamova, N. S. Shmakova, V. A. Pustovalov, B. Y. Saprykin, I. A. Chmutin, E. D. Zhikhareva
Properties of PETG Plastic After 3D-printing Using FFF Technology. Part 2
Properties of PETG Plastic After 3D-printing Using FFF Technology. Part 2
DOI: 10.22184/2499-9407.2022.27.2.58.64
The influence of the 3D-printing mode on the complex of mechanical, optical and thermal properties of PETG (polyethylene terephthalate-glycol) thermoplastic transparent polymer material processed by additive FFF (Fused Filament Fabrication) technology is considered. The dependence between light transmission coefficient, sample thickness and orientation during 3D printing is shown.
The influence of the 3D-printing mode on the complex of mechanical, optical and thermal properties of PETG (polyethylene terephthalate-glycol) thermoplastic transparent polymer material processed by additive FFF (Fused Filament Fabrication) technology is considered. The dependence between light transmission coefficient, sample thickness and orientation during 3D printing is shown.
Теги: 3d-printing 3d-печать additive technology fff light transmission coefficient mechanical properties optical properties petg thermal properties thermoplastic transparent plastic аддитивная технология fff коэффициент пропускания света механические свойства оптические свойства тепловые свойства термопластичный прозрачный пластик
Properties of PETG Plastic After 3D-printing Using FFF Technology. Part 2
Readers feedback
